Home

Current rcd

How residual current device (RCD) works

The earth fault currents that operate an rcd can range from 5mA up to many amperes. For typical domestic applications the typical trip current would be 30 mA. The RCD can be opened and closed manually to switch normal load currents, and it opens automatically when an earth fault current flows which is about 50 per cent or more of the rated tripping current An RCD constantly monitors the electric current flowing through one or more circuits it is used to protect. If it detects electricity flowing down an unintended path, such as through a person who has touched a live part, the RCD will switch the circuit off very quickly, significantly reducing the risk of death or serious injury Residual current device (RCD) It is not quite clear when and by whom the first residual current device (RCD) was developed, but it certainly appeared on the market in the 1950s and was initially used by some utility companies to fight energy theft due to the use of currents from phase to earth instead of phase to neutral current up to 6 mA. (iii) RCD Type F: RCD for which tripping is achieved as for Type A and in addition: (a) for composite residual currents, whether suddenly applied or slowly rising, intended for circuit supplied between line and neutral or line and earthed middle conducto RCD står för residual current device och är ett annat namn för jordfelsbrytare. RCCB står för residual current circuit breaker och är ytterligare e

RCDs Explained Electrical Safety Firs

  1. g current. The main purpose is to protect people from an electric shock caused when some of the current travels through a person's body due to an electrical fault such as a short circuit, insulation.
  2. How RCD devices work. Under normal operation, when there is no magnetic field in the core, no electricity flows through the search coil (gray) or relay (blue).Suppose you cut through the live wire (green) with your garden shears—and suppose it takes a tenth of a second for you to chop right through.During that tenth of a second, just as you're starting to cut, there is a current imbalance.
  3. If this current leaks through a person's body, it could lead to a potentially fatal electrocution. Residual current devices protect people. A residual circuit breaker with overcurrent protection. This is a protective device which combines two functions. It acts as a residual current device and a circuit breaker

Residual current devices (RCDs) / safety switches; Residual current devices (RCDs) RCD rules. RCD fact sheet. Types of RCDs. Testing RCDs. RCD letter to home owners. RCD letter to proprietors. Contact Building and Energy. For licensing and technical enquiries Contact us. Building and Energy general queries Tel: 1300 489 099 Fax: (+618) 6251. RCD means Residual Current Device. They are so called because they work based on the residual current in a circuit. The RCD is an electrical safety device specifically designed to immediately switch the electrical current flow when current leaking to earth is detected at a level harmful to a person using electrical equipment Additional RCD requirements may be included in AS/NZS 3000:2007, local building and electrical safety laws. Testing of residual current devices. If you are a person with management of a workplace, you must make sure that RCDs used at work are tested regularly by a competent person to make sure they are working effectively Residual-current device. A residual-current device (RCD), similar to a Residual Current Circuit Breaker (RCCB), is an electrical wiring device that disconnects a circuit whenever it detects that the electric current is not balanced between the energized conductor and the return neutral conductor Residual Current Device (RCD) is also known as Residual Current Breaker (RCB) or Residual Current Circuit Breaker (RCCB). Residual Current Breaker (RCB) works on the assumption that the current going to the electronics device must come out from the neutral wire, if there is no other way for current flow

Type A: RCD, for which tripping is scheduled. For the remaining sinusoidal alternating currents; For residual pulsing direct current; Residues are superimposed by a simple direct current of 0.006 A, with or without phase-angle control, free from polarity for pulsating direct current. Type B: RCD, for which tripping is scheduled. For type An explanation of what RCDs are and how they work. These have other names in other countries such as GFCI, however the principles are the same. Support thi.. Residual Current Devices RCD Blocks. Flexibility with uncopromising Safety. Residual Current Blocks - DDA The DDA Residual Current Blocks DDA200 and DDA800 facilitates the customers to assemble the product with S200/S800 MCBs in order to combine the protection against indirect contacts, offered by a standard RCCBs, with the protection against short circuit and overloads Protection is achieved by constantly monitoring the electric current flowing through one or more circuits that an RCD is used to protect. If it detects electricity flowing down an unintentional path, such as via a person or faulty appliance down to earth, then the RCD will switch off the circuit very quickly, reducing the risk or death, injury or fire A residual-current device or RCD is a device that disconnects a circuit whenever it detects that the electric current flowing through a circuit is not balanc..

Which type of residual current device (RCD) you should use

  1. g more and more common as we move towards an electrically safe future. When installed on an electrical system, RCDs are designed to break the circuit quickly whenever current is not balanced, thus ensuring that electricity is regulated and the risk of electrical shocks, fires and other damage is
  2. RCD Type F - Residual current protection for single phase inverters applications (engelska - pdf - Broschyr) DDA 200 type B: RCD blocks type B (engelska - pdf - Broschyr) RCDs: the best way to guarantee eletrical safety at home How they can protect from electric shock and fire (engelska - pdf - Produktguide
  3. In AC systems, additional protection by means of an RCD with a rated residual operating current not exceeding 30mA shall be provided for: (i) socket-outlets with a rated current not exceeding 32A. BS7671:201

Which RCD Type? - Electrica

A Residual Current Device (RCD) is a crucial safety device that every home should have. They are constantly monitoring the electrical current flowing through the circuit. They also work by sensing if there is a fault with the electrical system by switching off the flow of electricity automatically and quickly enough to prevent injury from electrocution. and will then close off the electricity too The purpose of residual current devices is to automatically break the electric circuit during instances of ongoing electric shock. See Clipsal's range residual current EMC Filter M 3~ RCD FC (frequency converter) L1 L2 L3 N PE Rres Fig. 5: DC residual current 1.2.2 Fault between the frequency converter and the motor The motor is operated at an output frequency (also referred to as machine or motor frequency) of 10 Hz RCD stands for Residual Current Device. In short, an RCD is an electrical protection device that disconnects a circuit in the event of a fault. The Residual Current Device operates on the principle of continuously monitoring the balance of currents between the Line conductor and the Neutral conductor

RCD, residual current device Voltimum Sverig

  1. 4 Reasons Why Your RCD Keeps Tripping. The Electrician's Point of View. In our opinion and point of view, there are large amounts of information both supplied in hardware and electrical stores as well as the internet material that can be misleading to parts (RCD) failing as a means of on sell
  2. Residual Current Device (RCD) Testing requirement for electrical equipment under AS/NZS 3760:2010 & AS/NZS 3012:2010 standards. On this page you will find all the information that you need to know to position yourself to ensure that your site is compliant with the appropriate regulations.If you have any questions at all please feel free to contact us
  3. Working of a Residual Current Device. In an RCD, the line and neutral conductors of a circuit pass through a sensitive current transformer. If the line and neutral currents are equal and opposite, the core remains balanced (Figure A). If there is an earth fault the neutral current will be lower than the line current
  4. Residual Current Devices (RCD) are designed to provide protection against hazardous earth fault current. The principles of the protection of persons against electric shock refer to the serious physiological risks (respiratory paralysis, ventricular fibrillation) that can occur in th

When electrical current travels outside of its intended route, it can miss its destination and continue to travel around a circuit. If the energy doesn't reach the destination, the voltage is not reduced and the wires overheat as the current continues to move. RCD tripping will occur when a short circuit is identified. Circuit Overloa An RCD (residual current device), has been designed to protect you from fatal electric shocks as it automatically switches off electricity when there is a fault. This potentially life-saving device protects against electrocution in instances where there is a bare wire, over-heating or earth faults RCD is the generic term for all types of residual current protective device. RCCBs are residual current operated circuit-breakers without integral overcurrent protection known in Germany as Fehlerstrom-Schutzschalter (FI-Schutzschalter) Residual Current Circuit Breakers (RCD) The Eaton range of residual current circuit breakers without integral overload protection (RCCBs), provided protection solutions to a wide range of applications. PFIM. A complete range of compact residual current devices for fault current/residual current and additional protection An RCD is defined in Part 2 of BS 7671 as being a mechanical switching device designed to open a set of contacts when the residual current (I∆n) reaches a given value. With reference to a single-phase RCD, the residual current refers to the difference between the current that is flowing in the line conductor compared to the current flowing in the neutral conductor under fault conditions

RCD stands for Residual Current Device. In short, an RCD is an electrical protection device that disconnects a circuit in the event of a fault. The Residual Current Device operates on the principle of continuously monitoring the balance of currents between the Line conductor and the Neutral conductor The Chint range of NL1 RCD's (residual current Devices) are available in a choice of poles, current ratings and mA ratings; please choose from the product options. RCDs are safer than miniature circuit breakers because they react much faster. They disconnect the circuit as soon as a fault or in-balance is detected current. Residual current devices able to detect such waveforms are known as type F RCDs. fault current and These devices are also able to withstand smooth DC residual current of up to 10 mA superimposed on the residual current. In addition, a type F RCD is also able to detect all the residual currents detected by a type A RCD The RCD is designed so that the current is interrupted in milliseconds, greatly reducing the chances of a dangerous electric shock being received. TORD4-63 2P 63A 30mA Residual current device (RCD), Ground fault circuit interrupter (GFCI), Earth Leakage circuit breaker (ELCB

Residual-current device - Simple English Wikipedia, the

RCD is listed in the World's largest and most authoritative dictionary database of abbreviations and acronyms. RCD - What does RCD stand for? The Free Dictionary. RCD: Residual Current Device: RCD: Recorded Data: RCD: Real Club Deportivo (Royal Sports Club, Spain) RCD A residual current device (RCD) is designed to shut off the electrical supply in the event of a fault. It is more advanced than a standard circuit breaker and works by monitoring the flow of electrical current between live and neutral conductors Geya RCD product series can be widely used in building lighting lines, and distribution systems, as protection for disconnection and conversion of powerline. In the event of over current, RCD can cut the faulty current within 0.1s, protect operator and equipment from accidents caused by leakage or residual current Consequently, the RCD is suitable for fault current/residual current protection and additional protection within the meaning of the applicable installation rules; Mains connection at either side; The 4-pole device can also be used for 3-pole connection: See connection possibilities

Residual current devices (RCDs) and Ground fault

Residual Current Device Protection. Western Automation Emobility has spent over 30 years developing the highest quality RCD technology on the market today and our RCD technology is continuously improving to meet the needs of customers and market conditions NAPIT's Bill Allan is back this month with more essential technical advice. The emphasis on the need for RCD protection in BS 7671:2018 means that, where RCBOs (residual current operated circuit-breakers with integral overcurrent protection) are installed, it is more important than ever for installers to understand the RCD function of the device Even though an RCD will not protect against all instances of electric shock, its function is to at least significantly reduce its risk. If someone touches both the Active and Neutral conductors(and the plugs or electrical appliances are faulty), he will cause the electric current to flow through his body - this contact will not be detected by the RCD unless there is also a current flow to earth The unbalanced current included the harmonic current, ground fault current, and surge current. A testing system was first set up in the laboratory, and the minimum value of the current causing RCD.

0. Introduction The Residual Current Device, or RCD, is one of the most important electrical safety devices in both the home and commercial environments. In short, an RCD protects against injury and death caused by electric shock by detecting an imbalance between the outgoing and incoming total current of a given number of circuits An RCD is an electrical safety device which provides protection by rapidly disconnecting the electricity supply in many situations where someone could otherwise receive a fatal electric shock. They constantly monitor the electric current flowing along a circuit. If there is an earth-fault, the RCD will sense a leakage (out of balance current. Trip current limits for RCD type A, DC pulse is allowed between 35% and 140% (even 200% for 10mA RCD type) of the nominal trip current e.g. for a 30 mA RCD the trip current can be between 10.5 mA and 42 mA. * Pulse DC models 1652, 1653 & 1654 only, 1 Smooth-DC 1654 onl

What is the difference between a residual current device

It incorporates ramp testing, for RCD tripping current measurement, and the unique Megger auto sequence test feature, which saves time by allowing the tester to conduct all the RCD tests, and to store the results while the operator stands by the RCD, resetting it as appropriate Current RCD's will normally be able to cut the power within 10 to 30 milliseconds. By installing at least two RCD's, the property's circuits can be divided evenly. This ensures some light and power remain if one RCD operates and also minimises faulty operation from appliances which have low-level leakage current Bulletin 1492-RCDA Residual Current Devices detect and interrupt leakage to the ground, helping you prevent injury to exposed personnel and damage to equipment. Use these devices with miniature circuit breakers for additional circuit protection from overload, short circuit, and ground fault

Megger loop testers offer both traditional measuring techniques and state of the art non-RCD Tripping technology. Use these products to determine the prospective earth fault current, which is the maximum current able to flow in a phase-earth fault in an installation, and also to indicate the prospective short circuit current which is the maximum current able to flow in the event of a. The RCD should trip within its specified time, which is usually 30 milliseconds. Notes. The recommended tripping current is 30 milliamps. Testing instruments are readily available from electrical wholesalers. In addition to the above RCD tests, the inbuilt test facility should be operated each time that the unit is in use Topic Title: RCD operating current Topic Summary: I - delta - n Created On: 31 October 2005 05:33 PM Status: Read Only : Linear: Threading: Single: Branch: Search Topic. Topic Tools. View similar topics: Print this topic. 31 October 2005 05:33 PM intrinsic4225B Posts: 1724 Joined: 30. TORD6B-63 4Pole Type B RCD 16A-63A 30mA Residual Current Circuit Breaker RCCB Read more Show Details TORD4-63 2P 63A 10mA A/AC Type Residual Current Circuit Breaker RCCB RCD Hi, [Based in the UK - I suspect regulations and configuration will be different in other countries] I have just had the electrician in to bring our house up to scratch, which included installation of a Residual Current Device (RCD). This is tripping every once in a while, and through a process of..

Current operated ELCB is also known as Residual Current Device, RCD. A Residual Current Device (RCD) has a toroidal iron core over which phase and neutral windings are wound. A search coil is also wound on the same iron core which in turn is connected to the trip coil. Figure below shows the constructional detail of RCD or Current ELCB RCD is a generic term which embraces the various forms such as RCCB, RCBO, etc. Residual Current Devices are now firmly established around the world as a primary means of providing protection against electrocution and fires caused by electrical faults English: Category:Residual-current devices. A Residual-current device or residual-current circuit breaker (RCCB) is a device to detect some danger voltage on metal covers and avoid human's shock by touching metal parts.Works due to Kirchhoff's first law: the same quantity of current flows to the device, as well as follows from device. If human touches metal cover under voltage, flow on the.

Residual current devices (RCDs) / safety switches

Many translated example sentences containing rcd current - Italian-English dictionary and search engine for Italian translations Fehlerstrom-Schutzschalter (RCCB, von englisch Residual Current operated Circuit-Breaker, sinngemäß auch als Differenzstrom-Schutzschalter bezeichnet) sind die am häufigsten verwendeten Geräte aus der übergeordneten Gruppe der Fehlerstrom-Schutzeinrichtungen (RCD, von engl. Residual Current Device). In den älteren, umgangssprachlich noch üblichen Bezeichnungen FI-Schutzschalter oder FI. The standard Type B RCD will detect residual current faults comprising of pure AC up to 1000 hertz, rectified AC, pure DC and pulsating DC. WA offers Type B RCD solutions in the form of technology that OEMs can integrate into their product and we also provide Type B & Type B+ RCD products compliant to IEC/EN 61008 and IEC/EN 62423 RCD - Residual Current Device. RCD - Residual Current Device - is a generic term for all types of residual current operated device which by definition is: A mechanical switching device or association of devices intended to cause the opening of the contacts when the residual current attains a given value under specified conditions. The more common types are 1492-RCD Residual Current Devices 92 Rockwell Automation Publication 1492-SG122G-EN-P — October 2014 Bus Bars 1492-RCD Cuttable Bus Bars Description Pins Pkg. Qty. Cat. No. 2Phase MCB to RCD 4 10 189-CL204 4Phase MCB to RCD 8 10 189-CL408 These devices are CE Marked, but not certified to any UL, CSA, or other standard

Types of Residual Current Devices (RCD)

How a Residual Current Device (RCD) Works ~ Learning

RCD designed to work with current containing higher harmonics like a RCD-block Type F combined with a correspondent MCB. Finally a RCCB Type B is installed to protect a line supplying a three-phase frequency converter driving a motor load. Example of correct design of RCD protection in an industrial application Ove Additional new high current loop mode. Faster measurements compared to loop tests with non-trip mode for RCD's. Unique zero adapter for fast, always reliable and accurate test lead and mains cord compensation The RCCBs FB200 series assures protection to people and installations against fault current to earth. Learn Mor Example sentences with residual-current device (RCD), translation memory. add example. en CIRCUIT BREAKERS, MINIATURE CIRCUIT BREAKERS, RESIDUAL CURRENT CIRCUIT BREAKERS, RESIDUAL CURRENT BREAKER WITH OVERCURRENT, RESIDUAL CURRENT DEVICE, RESIDUAL CURRENT DEVICE ADD ON BLOCKS, SURGE PROTECTIVE DEVICES, AND FUSE MATERIALS Residual Current Devices. RCDs and RCBOs. In this section. Residual Current Devices How residual current devices (RCD) work and what is inside a typical example

Residual current devices SafeWork NS

A Residual Current Device or RCD (also known as a Ground Fault Circuit Interrupter or GFCI in some countries) is a circuit protective device designed to achieve two important results: . To protect users from serious electric shock. To protect circuits from sustained earth faults that may occur where the normal operation of traditional protective devices like Fuses, and MCBs does not function. RCD's ex­ist in vari­ous dif­fer­ent forms and re­act dif­fer­ently de­pend­ing on the pres­ence of DC com­pon­ents or dif­fer­ent fre­quen­cies. The fol­low­ing RCD's are avail­able with the re­spect­ive sym­bols and the de­signer or in­staller is re­quired to se­lect the ap­pro­pri­ate device for the spe­cific ap­plic­a­tion

RCD Safety Switches are extremely sensitive, disconnecting in under 20 milliseconds of detecting a leakage current. This stops the flow of electricity through someone's body to earth. Importantly, this response time is much faster than the critical section of the cardiac cycle and therefore significantly reduces the risk of death or serious injury An RCD, which stands for Residual Current Device, is designed for human safety, and can often be life-saving. It prevents or minimises the risk of injury from an electric shock if you were to touch anything live (bare wires etc). The RCD works by detecting an imbalance in the circuit,. RCD Plugs and Adaptors. Safety should always come first with electronics, and with RCD plugs you can focus on just that. RCDs (Residual Current Devices) automatically switch off electricity if there is a fault, allowing it to protect you from electrocution Residual current devices (RCDs) are an essential safety feature in any home. It is the seller's responsibility to ensure that a home has at least two compliant RCDs installed before sale.But as a buyer, you need to understand why RCDs are so important, and how to make sure they remain fully functional after you take possession of your new home An RCD is a protection device which can be fitted to an electric circuit of a building and which trips to remove power if it senses excessive leakage current. It does this by measuring the total current in all power phases ( L+N for a single phase, L1+L2+L3+N for three phases ), which should ideally be zero - i.e. all current should circulate in the power wires and not flow to earth

fault current protection for residential and light commercial applications. Available with a choice of 40, 63 or 80A rating, and choice of 30 or 100mA sensitivity. All BG RCDs are the common Type AC, suitable for situations where there are residual sinusoidal alternating currents. The Time Delayed RCD is used typically when tw More appliances equals more natural residual current leaking to earth. The purpose of residual current devices is to protect us from current leaking to places it shouldn't. If you have followed my advice and still unable to find the cause of your rcd tripping then get in touch so i can help you (if you live in the Cardiff and Vale area)

Residual Current Circuit Breakers B10R Options and ordering codes B4/B6/B10/01/12 B10 R 20 16 RCCB Version Rated current Amps R 1 pole +N (2 pole) 20 Certification: CE, SEMKO Residual tripping current range : 0.5 IΔn ~ 1 IΔn Rated conditional short circuit current : 10 kA Electrical lifetime > 4,000 cycles Fastening torque: 2.0 N

Ignition of a fire by an electrical fault current requires a combination of current and time and S Type RCDs are designed with a current/time characteristic built in that ensures that an electrical fire will not occur within the response time of the RCD This means that, for an RCD with an (I∆n) of 30 mA, the current in the protective conductor must be no more than 30% of 30 mA, which is 9 mA. This is helpful when we consider that Note 2 of this Regulation states that RCDs may operate at any value of residual current in excess of 50% of the rated residual current of the RCD Blakley Electrics Ltd 1 Thomas Road Optima Park Crayford Kent DA1 4QX. Telephone: 0845 074 0084 Fax: 0845 074 008 residual current device (RCD,RCBO,RCCB)circuit protection devices from leading electrical industry manufacturer Standard / Customized Current transformer for GFCI, RCD Application. The GFCI component must consist of ZCT and GNT coils. The ZCT coil is used to detect a small ground Sult difference current between the live line and the earth line The GNT coil is used to detect an over-current caused by arcing or short circuit of the cable fire o

Safety & Security - Residual Current Device Defined Electri

RCD's assure a protection against fault current to earth in residential, commercial and indus- trial applications, reduce the risk of death or serious injury when accidentally a person who is grounded touches the energized part of the circuit and prevent the risk of fire caused by fault Residual Current: A fault current that flows to earth, due to an insulation failure within an electrical installation i.e. the difference between the current flowing into and out of s ystem via the live conductors . 1 RCD: Generic term for devices that can detect residual currents and are suitable for fault disconnection The 90 RCD range meets any ground fault protection requirement for any area of application. The range comprises MDC compact residual current c.b. with.

80 Amp 30mA RCD 2 Pole - Hager

Difference Between MCB, MCCB, ELCB and RCB, RCD or RCC

Current transformer for GFCI, RCD Application * Compatible with UL943 * Precision and steady output characteristics * Close to zero load shift * Excellent characteristics in balance and temperature RCD is a simple, low cost diagnostic tool that allows clinicians to detect cancer earlier, detect cancer recurrence sooner, titrate a patient's chemotherapy dose on an individual basis, and evaluate the effectiveness of therapy sooner

Earth leakage protection - RCD and RCBOs100 Amp 100mA RCD 4 Pole - WylexRCBO (MCB / RCD Combined) 6A-25A 30ma - SHOWTECHNIX200 Amp Main Panel Wiring Diagram, Electrical Panel BoxHager 14 Way High Integrity Design 30 Board | ElectricityElectrical - Consumer InstallationsHow to install RCBO in Hager CU | DIYnot Forums

Eaton's circuit protection products include miniature circuit breakers, residual current circuit breakers, moulded case and air circuit breakers, protective circuit breakers, transfer switch controllers and many more. Innovative protection concepts and diagnostics functions included China RCD manufacturers - Select 2020 high quality RCD products in best price from certified Chinese Rcd Breaker manufacturers, Rcd Plug suppliers, wholesalers and factory on Made-in-China.co Residual current device (RCD) A mechanical switching device designed to make contacts for carrying and breaking currents under normal service conditions, and to cause the opening of the contacts when the residual current attains a given value under specified conditions. The RCD may be fixed or portable (PRCD) It detects by RCD. any mismatch between two currents flowing through phase and neutral detect by RCD and trip the circuit within 30Miliseconed. If a house has an earth system connected to an earth rod and not the main incoming cable, then it must have all circuits protected by an RCD (because u mite not be able to get enough fault current to trip a MCB Buy RCD. Farnell offers fast quotes, same day dispatch, fast delivery, wide inventory, datasheets & technical support RCD:Generic term for devices that can detect residual currents and are suitable for fault disconnection. Customers and even manufacturers use the term RCD, when they are talking about an RCCB or an RCBO. The 18th Edition Regs list the following RCD formats: RCCB:Residual current protection only

  • Mobb deep rappers.
  • Sanotint färgkarta.
  • Öka testosteron naturligt.
  • Volvo originalservice kostnad.
  • Benzin youtube.
  • Jarritos dk.
  • Del i tryckpress digel.
  • Filmer kodi.
  • Ultraljud vecka 9 missfall.
  • Howard gardner intelligens.
  • New york summer events.
  • Rabatt hos byggmax.
  • Eritreansk lammgryta.
  • Afghanistan map.
  • 8 åring vaknar på natten.
  • Swimrun malmö.
  • Lehre baggerfahrer.
  • Lindex baddräkt barn.
  • Litteraturhistoria upplysningen.
  • Matt tema.
  • Massage vaxning göteborg.
  • Toppslätskivling regn.
  • Mahjong prisjakt.
  • Eyvind johnsons gata 7.
  • Delad ö i indonesien timor.
  • Ringa synonym.
  • Boesner uno vario.
  • Rambler mail.
  • Svt text 101.
  • Turneringsschema excel.
  • Hurtigruten trollfjorden sørgående.
  • Varnhem kyrka.
  • Pokemon pack simulator.
  • Neurodegenerativa sjukdomar barn.
  • Göran tunström sunne.
  • Nike hoodie barn.
  • Fatboy sittsäck utomhus.
  • Star wars the clone wars watch free.
  • Brand växjö.
  • Hobbit bilder zum ausmalen.
  • Honor 7 elgiganten.